Galvanic Isolator 64A (32A Version Pictured as default image)

The galvanic isolator prevents electrolytic corrosion. It blocks low voltage DC currents that enter your boat via the shore power earth wire. These currents can cause corrosion to the boat’s underwater metals, like the hull, propeller, shaft and so on.
The galvanic isolator consists internally of two diodes which are connected in anti-parallel fashion. When they are connected in this way, the diodes allow current in both directions but only above a certain threshold voltage. The voltage at which diodes conduct is about 1.4 Vdc. 

The isolator is installed directly behind your boat's 230V connection. The forward voltage from the galvanic isolator is higher than the potential difference between metals. As a result, this voltage will not allow conduction and as such, the galvanic isolator will prevent any electrolytic current. However, if there is a (higher) error voltage in the AC circuit, the diodes will allow current through and the residual-current device will break the circuit.

Victron Product Page

(GDI000064000)

SKU GDI000064000
Brand Victron Energy
Shipping Weight 2.0000kg
Shipping Width 0.164m
Shipping Height 0.064m
Shipping Length 0.224m
Shipping Cubic 0.002351104m3

Be The First To Review This Product!

Help other Caravan Camping Aus users shop smarter by writing reviews for products you have purchased.

Write a product review